Hello, Thank you very much for taking the time to share your feedback — and please don’t apologize.We fully understand your points, and you are abso...

@cfeldman Hi, Great to hear that the current version is working for you! Regarding your questions: 1 — Labels on very small parts For e...

@cfeldman Biber looks for Open Nest 1.0 please install the older version and if that did not solve the problem report the issue . thanks

@cfeldman that is what I mean by orthogonal edges in mitered joint  biber_simple_orthogonal_example_mitered_ortho.jpg

@cfeldman regarding the corners that you highlighted you can change the butt joint to "simple mitered" joint with orthogonal edges as shown in screen ...

@cfeldman The V shape supports (guides) are 2d element not 3d , you can change their thickness and they can be produced using laser cutter.If you are ...

and screen shot from the GH file, I used native grasshopper components for unfolding and packing along X axis if you wish to not use the open nest, ho...

@cfeldman attached is the GH file.  orthogonal_joint_example.zip

here is an example of how you can maintain the angle between the parts while making orthogonal cuts, the GH file will follow soon  biber_simple...

raw part  raw_part.jpg

You are almost there, one thing you need to consider for laser cutting ( I assume you are using 3 axis machine) is that the side faces of the non-orth...

Thanks Richard for sharing the screenshots, it looks fine, but I believe some dependency may be missing based on your windows version. I am planning t...

@richard-aubin hmmm, could you please share a screenshot of the folder containing SwarmSyncWin.gha, and the contents of "lib" folder. I suspect the in...

Hi there, please check if you see the following path exist under installation directory C:\Users\[username]\AppData\Roaming\Grasshopper\Libraries\Swar...

thanks for your reply, would it be possible for you to run the Rhino 8 on .Net FrameWork instead of .Net Core. you can see how to in this link. if t...